A positron emission tomography (PET) scan is a type of nuclear medicine imaging test. It's used to examine various body tissues to identify certain conditions by looking at blood flow, metabolism, and oxygen use. PET scans may also be used to see how well the treatment of certain diseases is working.
For a PET scan, a tiny amount of a radioactive substance, called a radioactive tracer, is used to show the metabolism of a particular organ or tissue. This test gives the healthcare provider information about the function and structure of the organ or tissue. It also gives information about its biochemical properties. A PET scan may detect biochemical changes in an organ or tissue that are signs of a disease process before physical changes related to the disease can be seen with other imaging tests. These include CT scans or MRI.
PET scans are often done along with CT scans (called a PET/CT scan) to give more definitive information about metabolism changes and exactly where they are happening in the body.
PET works by using a special camera that detects positrons emitted by the radioactive tracer in the organ or tissue being examined.
The radioactive tracers are attached to a chemical substance that a particular organ or tissue uses during metabolism. These substances include glucose, carbon, or oxygen. For example, in PET scans of the brain, a radioactive substance is applied to glucose to create a radionuclide called fluorodeoxyglucose (FDG), because glucose is widely used for metabolism. FDG is widely used in PET scanning.
Other substances may be used for PET scanning, depending on the purpose of the scan. If blood flow and perfusion of an organ or tissue is of interest, the radionuclide may be a type of radioactive oxygen, carbon, nitrogen, or gallium.
The radioactive tracer/sugar is put into a vein through an IV (intravenous) line. It moves through the blood and collects in areas with a lot of cell activity. During this time, the PET scanner slowly moves over the body. A computer creates a map of the body. The amount of the radionuclide collected in the tissue affects how brightly the tissue appears on the image. It also indicates the level of sugar uptake or cell activity in that organ or tissue.
For example, cancer cells use a lot of sugar and will show up as bright spots (called “hot spots”) on a PET scan. Damaged heart tissue will be less active and use less sugar. It would be seen as a darker spot compared to the normal heart tissue.
In general, PET scans are used to evaluate organs or tissues for the presence of disease or other conditions. More specific reasons for PET scans include:
There may be other reasons for your healthcare provider to recommend a PET scan.
The amount of the radionuclide injected into your vein for the procedure is very small, and there is no need for precautions against radiation exposure. The injection of the radionuclide may cause some slight discomfort. Allergic reactions to the radionuclide are rare but may happen. Tell your healthcare provider if you are allergic to or sensitive to medicines, contrast dyes, iodine, or latex.
For some people, having to lie still on the scanning table for the length of the procedure may cause some discomfort or pain.
Tell your healthcare provider if you are pregnant, think you may be pregnant, or are breastfeeding.
There may be other risks depending on your specific medical condition. Be certain your healthcare provider knows about all of your medical conditions.
Certain factors or conditions may interfere with the accuracy of a PET scan, including:
Tell your healthcare provider if any of the above situations may apply to you.
Your healthcare provider will explain the procedure and you can ask questions. Make a list of questions to discuss with your healthcare provider before the procedure. Consider bringing a family member or trusted friend to the medical appointment to help you remember your questions and concerns and to take notes.
You will be asked to sign a consent form that gives your permission to do the procedure. Read the form carefully and ask questions if anything is not clear.
Tell your healthcare provider, the radiologist, or the technologist if you are allergic to latex or sensitive to medicines, contrast dyes, or iodine.
Fasting (not eating) for a certain period before the procedure is required, usually for at least 4 hours. Your healthcare provider will give you special instructions ahead of time so you know how long you are to withhold food and drink. Your healthcare provider will also talk to you about using your regular medicines before the PET scan.
Tell your healthcare provider if you are pregnant or think you may be.
Make sure your healthcare provider has a list of all medicines (prescribed and over-the-counter) and all herbs, vitamins, and supplements that you are taking.
Don't use tobacco or consume any caffeine or alcohol for at least 24 hours before the procedure.
If you have diabetes and use insulin, you may be instructed to take your pre-procedure insulin dose with a meal 3 to 4 hours before the procedure. Your healthcare provider will give you specific instructions based on your situation. Also, a fasting blood sugar may be taken before the procedure. If your blood sugar is elevated, you may be given insulin to lower it.
Based on your medical condition, your healthcare provider may give you other instructions on what to do before the procedure.
PET scans may be done on an outpatient basis or as part of your stay in a hospital. Procedures may vary depending on your condition and your healthcare provider's practices.
Generally, a PET scan follows this process:
You will be asked to remove any clothing, jewelry, or other objects that may get in the way of the scan. A bracelet with your name and an identification number may be put on your wrist. You may get a second bracelet if you have allergies.
If you are asked to remove your clothing, you will be given a gown to wear.
You will be asked to empty your bladder before starting the procedure.
An IV line will be started in your hand or arm for injection of the radioactive tracer. (Depending on the type of PET scan, you may inhale or swallow the tracer.)
In some cases, an initial scan may be done before the radioactive tracer is injected, depending on the type of study being done.
You will be in a chair or on a table in a quiet room.
The radioactive tracer will be injected into your vein. The tracer will be allowed to concentrate in the organ or tissue for about 45 to 60 minutes. You will stay in the facility during this time and will be asked to rest quietly. You will not be hazardous to other people, as the tracer emits less radiation than a standard X-ray.
After the tracer has been absorbed for a certain length of time, you will be positioned on a padded table inside the scanner ring and the scan will begin. The scanner will move slowly over the body part being studied.
When the scan has been completed, the IV line will be removed. If a urinary catheter has been inserted, it will be removed, too.
While the PET scan itself causes no pain, having to lie still for the length of the procedure might cause some discomfort or pain, particularly if you have recently had surgery or a joint injury. The technologist will use all possible comfort measures and complete the procedure as quickly as possible to minimize any discomfort or pain.
Be sure to move slowly when getting up from the scanner table to avoid any dizziness or lightheadedness.
You will be instructed to drink plenty of fluids and empty your bladder often for 24 to 48 hours after the test. This will help flush the remaining radioactive tracer from your body.
The IV will be removed, and the site will be checked for any signs of redness or swelling. Tell your healthcare provider if you notice any pain, redness, or swelling at the IV site after you go home. This may be a sign of infection or other type of reaction.
Your healthcare provider may give you other instructions after the procedure, depending on your particular situation.
Before you agree to the test or the procedure, make sure you know:
The name of the test or procedure
The reason you are having the test or procedure
What results to expect and what they mean
The risks and benefits of the test or procedure
What the possible side effects or complications are
When and where you are to have the test or procedure
Who will do the test or procedure and what that person’s qualifications are
What would happen if you did not have the test or procedure
Any alternative tests or procedures to think about
When and how you will get the results
Who to call after the test or procedure if you have questions or problems
How much you will have to pay for the test or procedure